The Dr. Breus Bed (Talalay Latex)
Oct 25, 2010 11:51 PM
Joined: Oct 24, 2010
Points: 18
Hello all, still on my hunt for a good bed.  My wife and I were originally looking at a Kingsdown Sleep to Live 800 Series (red/blue), but after reading some reviews we were a little skid dish and decided to look at a latex bed.  Now I know there are a lot of on-line companies like Sleepez and FloBeds, but buying a bed untested from an online retailer just is a little too inconvenient as we have to deal with shipping cost if we get the firmness wrong.  So we went back to my local Sleepy’s to look at what they have to offer for latex beds.  Turns our they just received the new line of Dr. Breus latex beds that same day which are made by IBC.  We tried all five models and narrowed it down to two.  As this is a brand new line of beds it is hard for me to find on-line detailed specs.  I know the salesperson tells me the bed is entirely Talalay latex, but I would like to confirm that from another source.  Does anyone have anything they can share on me these beds?  Or if there are any other recommendations of other beds we should look at?  Thanks all.

Dan

Re: The Dr. Breus Bed (Talalay Latex)
Reply #68 Mar 27, 2011 11:26 AM
Joined: Feb 16, 2011
Points: 4
Dfran1,

 

 

 

We never had to rotate the tempurpedic. At the end before we bought the Dr. Breus, we did try, they are very heavy mattresses so it is good that we never needed to. We did buy one of the originals I thought it was 1989, but they weren't sold i n US till 1991 or 92 but we got a lot of years of great sleep and when we decided to get a new one a lot of family and friends still wanted to know if we were selling it because they wanted it(not a sales pitch. LOL). It was King size.

Marissa

This message was modified Mar 28, 2011 by nosleep101
Re: The Dr. Breus Bed (Talalay Latex)
Reply #69 Mar 29, 2011 10:02 PM
Joined: Mar 28, 2011
Points: 22
Cazual,

The Dr. Breus Bed (Talalay Latex)
Original Message   Oct 25, 2010 8:51 pm

To hopefully shed some light on your original posted question(s), I would like to share what I have found while shopping these beds


1. “I know the salesperson tells me the bed is entirely Talalay latex…”

This is from the Dr Breus Website ( http://www.thesleepdoctor.com/the-dr-breus-bed/ )
“The Dr. Breus Bed™ is constructed using three primary ingredients: tempsense™, along with multiple layers of natural     Talalay Latex and High Density, Soy-based Poly-foams. These materials are manufactured in the United States… The Dr. Breus Bed™ has a 20 year limited warranty…”


2. The Talalay latex used in the beds are manufactured by Latex International. More info about sleeping on latex, and their website http://www.latexfoam.com/index.php?option=com_content&view=article&id=70&Itemid=81


3. The beds are manufactured by International Bedding http://www.ibcgroup.com/announcements/the-sleep-doctor-dr-michael-breus-releases-revolutionary-new-mattress-line

Re: The Dr. Breus Bed (Talalay Latex)
Reply #70 Mar 30, 2011 8:05 PM
Joined: Mar 25, 2011
Points: 15
You forgot 

#4.  The Dr. Breus (or international bedding for that matter) are junk!!!!!!!!  There is absolutely no consistency with these beds in manufacturing!!!  These Dr. Breus beds are not worth any more than $1000 and that may be too high!!!!!!!!!!!!

I am finally starting to get used to my new RhapsodyBed by Tempur-Pedic, and I received my free pillows as promised by the 2nd Sleepy's salesperson!!  I know some have had bad luck with them but I have had great luck so far with Sleepy's!! I will keep this forum updated.

This message was modified Mar 30, 2011 by dfran1
Re: The Dr. Breus Bed (Talalay Latex)
Reply #71 Jun 27, 2011 1:37 PM
Joined: Jun 7, 2011
Points: 12
Thank God I stayed away from Dr. Breus! I had seriously contemplated getting one judgin by the one they had in the sleepy's showroom.

 

Glad your happy on your Tempurpedic and hope you get many years of quality sleep from it.

Re: The Dr. Breus Bed (Talalay Latex)
Reply #72 Jul 4, 2011 9:46 PM
Joined: Jul 4, 2011
Points: 3
I enjoyed reading this thread and have some thoughts, and my own Dr. Breus Bed experience to share.

I had never really researched beds before I bought them in the past.  I just went into the store, and let the salesman tell me what he thought was a good mattress for the money.  This time out, I wanted to find something that I liked the feel of.  I started off looking at innerspring mattresses with pillow tops.  Several of my coworkers have Tempurpedics and had nothing but good things to say about them, so I was interested in finding out more about them too.  While researching memory foam, I also ended up reading a lot about latex (Talalay and Dunlap).  I liked what I read about the latex ones, and saw a few nice online sites.  I read that natural real rubber was better and lasted longer than polyurethane foam mattresses.  I came close to ordering one, but couldn't bring myself to do it without getting to test one out in person before buying.  But, it made me look for anything labeled latex as I looked for a bed. 

So, while I was in one store trying out the plushest pillow tops, I layed on some Dr Breus beds.  Wow!  Talk about the weightless soft feeling that some mattresses brag about.  I loved the way the Dr. Breus Monogram Gold felt.  And then a salesman came up and told me that it was made of Talalay foam with a natural foam core.  A soy based foam....  In hind site, soy based doesn't even make sense.  Foam made from rubber does. 

I bought the Dr. Breus and couldn't wait to sleep on it.  When I got it, I thought it didn't feel like the one in the store.  I was disapointed.  I went back to the store and laid on the floor model again, and told my salesman what I thought.  He assured me that it would feel the same after I broke mine in.  So, I went back home to try it out some more.  While doing so, I looked at the tag.  I know I should have done that while I was in the store, and everyone that read this thread knows what I saw there.  Over 70% Polyurethane.  To me that meant that it was a much cheaper bed to make than it was being sold for.  And, the value of the bed means something to me too.  I felt like I paid more than it was worth, and it didn't feel the same as the floor model.  But, at least it has the 15 year warranty.  And I had 60 days to make sure I was happy with it. 

After one month I could feel an impression in the spot I slept in.  If I took off the sheets and mattress cover there was no visible impression.  It was just something I felt when I laid on it.  So, when it comes to warranty issues, do they measure visible sags or ones you can feel?  My guess was that this bed could have invisible impressions and might not be covered under warranty.  Just a guess on my part.  But, regardless, I knew I didn't want it if I was feeling this in one month.

I returned mine.  I don't think it was made of good material.  It didn't feel like the one in the store.  And I felt an impression where I slept.  I had also written a couple emails to Dr Breus web site, and to International Bedding asking for more detail on the construction.  I didn't get any answers, but International Bedding site did acknowledge reciept of my email.

Re: The Dr. Breus Bed (Talalay Latex)
Reply #73 Jul 4, 2011 10:27 PM
Location: San Francisco Bay Area
Joined: May 13, 2011
Points: 170
What do (did) you try next, flasteelers fan.  It's sad that companies are devious about their products.  Mix in a bit of latex, call it a latex bed.  Let the buyer beware.  I'm glad you decided to do research and found this forum.  Hopefully it will help you find the right bed for you!  Oh, and read the return policies carefully.  You are correct about sag; it's now how much sag you feel, it's how much you can measuer.  And PU foam is inexpensive and does not keep it's shape.
Re: The Dr. Breus Bed (Talalay Latex)
Reply #74 Jul 6, 2011 6:55 AM
Joined: Jul 4, 2011
Points: 3
I returned my Dr Breus bed within the first 60 days, and got a Tempur-Pedic.  It was more money than the Dr Breus, but I feel like I got my money's worth.  It felt good (like the store floor model) as soon as it was delivered.  I'm was a little concerned because I got the Cloud Supreme, and the Cloud series doesn't have the track record of their older line yet.  I hope it will though.

But, it's also a polyurethane foam bed.  The tag on my Tempur-Pedic says 56% Visco Elastic Polyurethane Foam and 43% Polyurethane Foam.

I haven't had it as long as the Dr Breus bed yet, no complaints yet, and I don't think I'm going to feel an impression in less than a month like I did with the Breus.

Re: The Dr. Breus Bed (Talalay Latex)
Reply #75 Jul 6, 2011 3:03 PM
Joined: Jul 5, 2011
Points: 20
Folks

While I'm a newby to this forum and as well as the DIY mattress symposium, I would like to offer my comments on the matter. If the customer is sold any product by misleading means then the seller has a responsibility to make said product right by the customer. That means a refund of the full price or some recompense depending on the customer's wishes. I would like to state, that I recently purchased one of these beds. I've been sleeping on a wave less-water bed for nearly 30 years. While they provide good support the minuses became too much. So I went looking for a new mattress that would offer the same support as a water bed mattress as well as allow me to keep the expensive frame and headboard from the waterbed. For those not in the know concerning water beads and their foundation systems, I would like to provide some insight. I have two sets of draws under a very substantial frame. The frame consists of 3 sections of 1/2" ply with 4 2"x8" wood sides attached to the plywood.

So I had to have a replacement solution that not only provided a similar experience to a waterbed (comfort and support) but allow me to insert the mattress into the existing waterbed frame. Once I determined the frame size was a Cal King, I then tried to find the appropriate mattress.

Mattress shopping is akin to root canals and media blitzing. Every mattress store had the best solution. Even though the customer can see a varied selection, it's extremely hard, if not impossible to compare apples to apples. Finally after 4 days of hard shopping I found a place that was willing to try and provide me with the needed information to allow me to make a somewhat educated decision.

I bought, for better or worse, a Dr Breus bed. The sales person didn't try to sell me the bed as a total latex bed solution. I was told what comprised mattress content and allowed to make the decision based on those facts. I understood the purchase and was afforded a price similar to a higher end coiled system bed. So I don't feel I was sold a pig-in-a-poke.

Should I find this system doesn't meet my needs. I'll return it for a refund and look into designing a latex style mattress. I'm not sure that I have a problem with utilizing other foams in conjunction with latex to keep the costs down while providing the best comfort for the least amount of time and resources spent (best bang for my buck).

So I would like some constructive feedback from the varied cornucopia of knowledge contained by the folks on this forum.

The wife and I are back and side sleepers. Were both passed middle age and I'm over 6” tall. She is only 5” 6”. We've grown into what most folks call the late middle aged form. I've always been a large guy (played the line in football).

Thanks and sorry for possible being to verbose.....smiley

Re: The Dr. Breus Bed (Talalay Latex)
Reply #76 Jul 7, 2011 7:43 AM
Joined: Jul 4, 2011
Points: 3
Timby, I hope you'll keep us posted on how things go with your Dr Breuss bed.  Even though I didn't keep mine, I'm still curious as to whether or not others will have issues (impression in less than a month) or not.  I'm not as big as you, so you should know quickly. 

Your bed must be really tall sitting on that water bed platform with drawers underneath?  I picture your wife needing a ladder to get on the bed.  All the Dr Breus beds I saw were very thick.  I got the low profile foundation when I got mine, and it was still pretty tall on my standard bed frame. 

And you mentioned not being sure about utilizing other foams in conjunction with latex to keep costs down.....  I think you've already made that plunge when you bought the Dr Breus bed.  That's what they do in the construction of their bed, only they don't keep the cost down for the customer.  So, you'll know first hand if you decide to build your own later.

Good luck with your new bed.

Re: The Dr. Breus Bed (Talalay Latex)
Reply #77 Jul 13, 2011 2:12 PM
Joined: Jul 5, 2011
Points: 20
flsteelersfan wrote:

Timby, I hope you'll keep us posted on how things go with your Dr Breuss bed.  Even though I didn't keep mine, I'm still curious as to whether or not others will have issues (impression in less than a month) or not.  I'm not as big as you, so you should know quickly. 

 

Your bed must be really tall sitting on that water bed platform with drawers underneath?  I picture your wife needing a ladder to get on the bed.  All the Dr Breus beds I saw were very thick.  I got the low profile foundation when I got mine, and it was still pretty tall on my standard bed frame. 

And you mentioned not being sure about utilizing other foams in conjunction with latex to keep costs down.....  I think you've already made that plunge when you bought the Dr Breus bed.  That's what they do in the construction of their bed, only they don't keep the cost down for the customer.  So, you'll know first hand if you decide to build your own later.

Good luck with your new bed.

Well here is my report after nearly a week in my new Dr. Brues bed. As I previously stated my water bed went south for the final time (began leaking like a sieve). After paying nearly $200 to have the WB mattress pumped down and the old hard side frame connected to the drawers, we were nearly ready for the new mattress. I went in and stapled some inserts to protect the new bed from the existing brackets (used to secure the 8" side boards together as well as connect the frame to the platform).

We took delivery last Saturday. The bed fit like a glove in the existing WB hard side frame. The top of the mattress is about 2 to 3 inches above the existing frame. We put on the mattress cover and laid on the bed for a while to see how it felt. The mattress is firmer than the one in the store. I have to wonder if that is partially because of the frame as it extends most of the way up the sides of the mattress. This doesn't allow the bed to extend horizontally as with typical beds when you lay down.

My grown up son ran in and jumped onto the new mattress expecting the same amount of give as the WB. Was he surprised. It did cushion the attach but didn't give nearly as much as the WB. So we heard a muffled groan from him. He did say that he liked the mattress selection. My grown daughter has tried the new mattress as well. We nearly had to drag her off the bed. She wants one also.

We've sleep well in the bed and my wife, while a little over 5' 6” is able to get into the bed. I don't have nearly as much trouble as I'm nearly 6' 2”. Although, we've a lot of practice since we've had the Water Bed nearly 30 years. The new mattress is breaking in and is conforming more to our distinct body types. I do have a 3” high density memory foam topper we purchased years ago to go on top of the water bed. The topper allowed us to get rid of that nasty electric heater that is mostly required to keep the water bed to a decent temp. Should the mattress not be as comfortable as we like, we'll utilize the memory foam topper.

The wife seems to be sleeping well as she hasn't been getting up in the middle of the night and seems to be sleeping until the alarm goes off. I'm still evaluating the comfort. I have problems sleeping due to a couple of herniated disk in my lower back. I do notice that I'm not as sore in the mornings.

I'm still experimenting with pillow selection. I'm having some neck discomfort and am contemplating some other options. I would appreciate any feed back concerning pillows for a mainly back sleeper. We've tried memory memory foam and don't like them. I'm currently using a memory foam pillow to pad my desk chair. It seem to work well for my butt but not for my head....LOL

I will keep all apprised on how things work out with the bed as time goes along. I will consider a purely latex mattress should this one fail to meet our standards.

Recent Posts