The perfect Memo Foam/Latex/PU mattress for $706
Nov 19, 2007 2:06 PM
Joined: Sep 3, 2007
Points: 167
Okay, as you may have noticed, I've been obsessing about a perfect foam mattress design, and I think I finally have it. It is made of multiple 2" layers of very dense foams for longevity and versatility (1" layers are very delicate). One can arrange the layers in a number of different orders to achieve the feel they are looking for. This some what limits the risk out of buying on-line (of course there is the risk that FBM gets your foam wrong the first time.) But you should not have to abandon a layer. This is a 10" mattress, which leaves 2 additional inches you could add if you need to soften it up and maintain a 12" maximum thickness (even deep pocket sheets do not fit if thicker than 12".) I think that by mixing dense PU foam and latex, you could achieve the support and softness that some people have not been able to achieve with latex alone. Also, if you find that you do not like the springy feel of so much latex, you could move some of the PU further up, dampening the "jiggle". One could order all the layers in split sizes except for the memo foam top, which should be single piece. This would allow each partner to arrange his/her side independently. Here goes.

2" Isoform memo foam (5lb dense, 17-19ILD - said to be more firm than most memo and more breathable, got highest ratings on epinions) $150

2" FBM 20ILD talalay latex  (placing this next to the memo foam topper may work as a heat sink, helping to further ventilate the memo foam.) $160

2" FBM 36ILD HQ foam (2.5 lb dense base foam) $111

2" FBM 32ILD talalay latex  $170

2" FBM LUX HQ foam (2.9 lb dense, approx 50ILD base foam) $115

All prices are for king size, shipped (except Isoform, which may charge $20 shipping or so. I've heard you can call and get free shipping.)

Again, one should weigh, individually, the HQ foam form FBM to assure that they sent the correct density. I would also consider calling them and placing the order by phone, letting them know you will weigh the foam when it arrives -- got to keep 'em honest! Feel free to recommend changes to the "perfect" foam mattress.

This message was modified Nov 19, 2007 by donw
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #8 Nov 19, 2007 10:48 PM
Joined: Nov 15, 2007
Points: 157
donw wrote:
The problem is that, for most of the pieces, the next best seller is nearly twice as much. Here are some competitors. PerfectFit is the most reasonable, but one would have to find out the cost of custom sizes.

PerfectFit is an upholstery supplier, and the foam sizes listed are not quite large enough for a king-size bed, but they say that other sizes are available. Looks like reasonable prices.

Foam On-line does custom sizing, but seems expensive.

Simple-pedic has a price calculator and seems very expensive.


But if you're not getting the quality foam you're paying for, how is it really a good deal?
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #9 Nov 19, 2007 11:18 PM
Joined: Sep 3, 2007
Points: 167
That's just it. With their PU foam, supposedly, you CAN get the right density. They do sell both HD and HQ foams. A good test of this will be Steve2u's order. Let's hope he gets what he ordered. And their latex is pretty good. Their pink 5.5lb memory foam is really 4lb...and it's a good 4lb foam. In fact, it's a good price for a good 4lb foam. It's just not 5.5 like they claim...and they do not have any heavier.
This message was modified Nov 19, 2007 by donw
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #10 Nov 20, 2007 2:04 AM
Foam Nerd
Location: USA
Joined: Aug 30, 2007
Points: 605
donw, the sample of FBM pink foam I have is a 5 lb foam or pretty close. I'm basing that not so much on weight as just the feel. There is no mistaking a 5 lb foam for a 4 lb foam.

I think the only conclusion we can really draw from your topper is that the density may just very a lot. I don't know, for example, how the density of a "bun" varies from top to bottom or end to end. Maybe the topper you got was from a lower density section. We need a few more "data points" before we can really say the FBM's memory foam is a 4.0 foam.

But it's also true that if the density truly does vary by up to 30%, it becomes a real crap-shoot what you'll get. I don't think I would order memory foam from them knowing I might get a 5.0 foam and I may get something significantly less.
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #11 Nov 20, 2007 12:00 PM
Joined: Sep 3, 2007
Points: 167
haysdb, I have not felt many 4lb memory foams, but I would say that the pink stuff is fluid-like and very slow and VERY soft (like you described your sample). Are 4lb foams generally not like this? It seems like in one of your recent posts, you estimated your sample density at 4.4lbs or so??
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #12 Nov 20, 2007 9:08 PM
Foam Nerd
Location: USA
Joined: Aug 30, 2007
Points: 605
As near as I can estimate, my sample is ~4.75 lb foam. Here was my calculation:

haysdb wrote:
The larger of my two samples is between 1.3 and 1.4 oz according to my analog postal scale. Figuring it would not be accurate at the lowest end of the scale, I first placed a weight on it then added the foam on top. I measured it at three different points on the scale and all were within the above range.

The sample is not precisely regular in shape. I measured the minimums and maximums with a stainess steel ruler marked to a 1/16".

Min: 3 13/16 x 3  7/8  x 1 7/8 = 27.7 in3

Max: 4       x 3 15/16 x 2 1/8 = 33.5 in3

Avg                              30.6 in3

The density of my sample is ~4.75 lbs/ft3


Notes:
  • I can make no claim for the accuracy of my postal scale. If it's off by 10% that could add or subtract almost .5 lb to or from the calculated density.

Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #13 Nov 24, 2007 12:00 PM
Joined: Sep 10, 2007
Points: 395
Everyone is different, but entire setup sounds way too soft for me. Also, I'm not a fan of memfoam. As long as messing with that many layers, why not zone? For sidesleeping, I would take roughly 20/36/50/50 hips and 20/20/32/36 shoulders. Leftovers for the legs. Run support layers widthwise from twin material and 20 layer lengthwise sidexside. And I would deal only with a supplier I trusted.
Re: The perfect Memo Foam/Latex/PU mattress for $706
Reply #14 Nov 24, 2007 12:13 PM
Joined: Sep 3, 2007
Points: 167
I like the idea of zoning, but it seems troublesome. Do you glue the zones together?

Recent Posts