Adjustable bed (Leggett & Platt) Owners question
Feb 28, 2010 1:56 PM
Joined: May 3, 2008
Points: 827
I responded to someone who has an adjustable base and latex over that and asked where they got it, but more importantly which one?  Didn't respond though.  I went to Leggett & Platt's website, and there are many, many varieties of adjustable bases.  My main concern is being quiet, I don't care about the massage part, I want it to go up and down as far as it can, but I want it quiet.

Also I hate to go into a mattress showroom and ask about that only.   I really feel like they would bug the heck out of me to buy one of those crummy S mattresses or T mattress.  I am searching to buy on the internet, but I can see why I can't find any, they must weigh  a ton?  I saw Flobeds Faqs say if you order an adjustable bed you might want to keep that as the shipping was really high like $400 if I remember correctly.  I couldn't tell what Flobeds adjustable base really was, it didn't look like a L&P base, but it was expensive.

I also read somewhere here that Flobeds suggested buying it locally as it would be cheaper, so that is what I would do if I can find a dealer I can tolerate.  I haven't enjoyed buying beds at all locally.  Always a waste of money and the sales pitch is overwhelming.  I just wish I could avoid that part.

But if I am getting a new bed I want the adjustable base.   I saw Costco's 5 adjustable beds, unfortunately you have to order their mattresses, and their latex mattresses on those has foam in them so those are out for me.  I do want layers I can change out.
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #2 Feb 28, 2010 10:25 PM
Joined: Dec 29, 2009
Points: 57
Leo,

Just wanted to reply to your first comment above...about requesting this info before.  I apologize, I'm afraid I am the culprit and it was me that you asked the question of!  I haven't been spending a lot of time on the forum lately as I have been very busy at work and apparently missed your question which I just noticed tonight as I was browsing through.  If you still want to know what hip/shoulder pieces I have in place, I will check for you.  I have been moving them around a bit but that's what I LOVE about the VZone...the fact that you can customize one part of your body but leave the others the way you prefer it perhaps!

TJ

Re: Adjustable bed (Leggett & Platt) Owners question
Reply #3 Feb 28, 2010 11:55 PM
Joined: May 3, 2008
Points: 827
TJ12 wrote:
Leo,

Just wanted to reply to your first comment above...about requesting this info before.  I apologize, I'm afraid I am the culprit and it was me that you asked the question of!  I haven't been spending a lot of time on the forum lately as I have been very busy at work and apparently missed your question which I just noticed tonight as I was browsing through.  If you still want to know what hip/shoulder pieces I have in place, I will check for you.  I have been moving them around a bit but that's what I LOVE about the VZone...the fact that you can customize one part of your body but leave the others the way you prefer it perhaps!

TJ


No problem, it is hard to keep with this forum as busy as it is.  I get overwhelmed sometimes reading it all, information overload.

Yes, I would like to know more about the Vzone and what you ended up using and liking for the hip and shoulder.  Also do you feel the velcro or the material underneath the latex ( I would knowing me).

Thanks. 
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #4 Mar 1, 2010 12:02 AM
Joined: May 3, 2008
Points: 827
TJ,

Thanks for all the information.  Yes, I went to that website you mentioned a year ago, and for some strange reason it was closed!  It was suppose to be open it was a weekday during the day, I never went back, it was a long drive to get there too, I was put off by that

I may try again, since they seem to be the only ones that have a selection.  I went to Mattress Firm and they had "siliver" and "gold" models which really irritates me just like their mattresses, give me a name that L&P uses so I can compare!  So I did get to see them run at least.  The one was $1200 for the bottom model that has no extras at all, and I don't believe either model is a wallhugger, which I decided I need.  Can I ask how much the Prodigy was?  Electropedics website doesn't have prices.

Also there are only 2 models (according to L&P) Prodigy and one other that you can use battery backup for.  I don't want to be stuck in upright if power goes out, and when it goes out it goes out for hours or days.  So you are lucky your model you can get the battery backup for $49 at Tigerdirect (L&P website again mentioned).

I am pretty overwhelmed by all of this.   Thanks for your information and help.
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #5 Mar 1, 2010 2:25 AM
Joined: Dec 29, 2009
Points: 57
Leo3 wrote:
No problem, it is hard to keep with this forum as busy as it is.  I get overwhelmed sometimes reading it all, information overload.

Yes, I would like to know more about the Vzone and what you ended up using and liking for the hip and shoulder.  Also do you feel the velcro or the material underneath the latex ( I would knowing me).

Thanks. 


I will have to go and check the VZone for you later (and I will!) but my husband is sleeping now, so I can't pull the bed apart without freaking him out!!   We are about to keep experimenting so as soon as I open up the cover again, I will check for you.  But I have borrowed parts of his to test out different configs on mind.  I know my hips are firm...I needed that support..but I believe the shoulders are soft.  I'm pretty sure that's what it's like now.  I also softened the knees from the XF piece to firm I think which comes with the firm VZone. 

I know a lot of people have a lot of issues with nerves and feeling things..but the velcro is in between the pieces (on the 3" high sides--velcro is attaching pieces side to side) and so, NONE of it even comes near your body...not to mention there is the convoluted 2" topper and organic wool/cotton mattress cover on top of that.  So, no...no issues there at all.

TJ

P.S.  Information overload is an understatement!!

Re: Adjustable bed (Leggett & Platt) Owners question
Reply #6 Mar 1, 2010 2:40 AM
Joined: Dec 29, 2009
Points: 57
Leo3 wrote:
TJ,

Thanks for all the information.  Yes, I went to that website you mentioned a year ago, and for some strange reason it was closed!  It was suppose to be open it was a weekday during the day, I never went back, it was a long drive to get there too, I was put off by that

I may try again, since they seem to be the only ones that have a selection.  I went to Mattress Firm and they had "siliver" and "gold" models which really irritates me just like their mattresses, give me a name that L&P uses so I can compare!  So I did get to see them run at least.  The one was $1200 for the bottom model that has no extras at all, and I don't believe either model is a wallhugger, which I decided I need.  Can I ask how much the Prodigy was?  Electropedics website doesn't have prices.

Also there are only 2 models (according to L&P) Prodigy and one other that you can use battery backup for.  I don't want to be stuck in upright if power goes out, and when it goes out it goes out for hours or days.  So you are lucky your model you can get the battery backup for $49 at Tigerdirect (L&P website again mentioned).

I am pretty overwhelmed by all of this.   Thanks for your information and help.


They didn't have a ton of the L&G, but I think they could get anything.  It seems that the upper models sell better.  But believe me...no pressure there like a typical mattress/bed store.  Very kind to work with.  The Prodigy wasn't cheap but we figured a bed like that lasts 20 years so we went for it...we paid $2900..which if you look around the other websites is still a little less than what most charge so we just jumped right in on this one.  (Beds for medical reasons are tax deductible with a Rx from your doctor--- my husband needed this for his herniated cervical discs  so we needed to get the purchase in at the end of last year to take advantage of that.)  Also, good point about the wallhugger option..yes, that was a requirement for us too....  I thought the battery back-up was built into the box...I was pretty sure there were batteries somewhere when they installed it (but could have been the remote! ) so thank you for that tidbit of info..I knew about the power thing but imagine how useful that would have been if it needs this battery back-up to work!! LOL  And we live in LA where we seem to be having tons of power issues lately (lost power for extended time twice in the last month alone so  I will check that too! )

I was overwhelmed too and in a rush to buy something...I liked some prettier German slatted models that were sleek but was worried about customer service.  Every bed place we talked to, was recommending L&P and had nothing but good things to say about their customer service so we dived in. We figured if we just got the top model, we would have less issues...besides that ..there is that crazy iPhone compatible option! LOL  Just kidding...don't have an iPhone but it is amazing!  Seriously, I don't think L&P changes the model names as all the mattress companies do, so go somewhere else if you have to.  Their website has a search engine to find a dealer with the models you want near you...although it isn't completely accurate because they said there were no dealers for the Prodigy in LA County but then I found it at Electropedic anyway!  So much for that!

Overall, we love our FloBed (adjustments and all) and L&P foundation.  Even our friends all come over and don't want to get out of our bed!

Re: Adjustable bed (Leggett & Platt) Owners question
Reply #7 Mar 1, 2010 11:28 AM
Joined: Oct 8, 2009
Points: 192
L&P adjustable foundations, can I assume they are really cheap and if not why get theirs instead of whatever...

i cant find a price anywere, even the .com stores dont have them, more confusion, and it is monday morning 
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #8 Mar 1, 2010 2:03 PM
Joined: May 3, 2008
Points: 827
TJ12 wrote:
 I thought the battery back-up was built into the box...I was pretty sure there were batteries somewhere when they installed it (but could have been the remote! ) so thank you for that tidbit of info..


The DC Whisper Quiet motor has

a weight lifting capacity of up to 450 lb. on top of the mattress
an it also has the “power down” box. This feature allows the
bed to be reset to the flat or horizontal position should you
lose electrical power or if the bed remote is not communicating
properly with the adjustable base.



I stand corrected.  From the L&P website.


However AC motor power does need the $49 power backup unit.
This message was modified Mar 1, 2010 by Leo3
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #9 Mar 1, 2010 7:12 PM
Joined: Jan 18, 2010
Points: 143
I own the Ergomotion 400 adjustable base. It is a wall hugger. I bought it locally for 1200.00 last Sept. At the time I was told it was made my Leggett & Platt and I was able to find it on the LP site. I can't find it on L&P site anymore, so I don't know if they are still affiliated or not.

I do love it and it comes with a separate box that you put 9 volt batteries in to use in case of power outage. (I think it takes 6 batteries.) I keep this backup box in the closet. If needed the box with batteries plugs into the control box which is located under the bed. You use the battery backup box only for emergencies/ power outages.

I emailed Ergomotion customer service once when I was confused about the massage timer on the remote, and they emailed me back within an hour... they had a very friendly tone. I've never had trouble with it, so I can't say anything else about customer service.

Ergomotion 400 product info: <a href="http://www.ergomotion.us/products/400.html"target="_blank">link</a>

US Beds online site with reviews: <a href="http://www.usbeds.com/Products/Ergomotion%20400%20Series%20Adjustable%20Bed%20Base%20With%20Wireless%20Control%20and%20Massage.aspx"target="_blank">link</a>

Denver Mattress Co. online with reviews: <a href="http://www.denvermattress.com/details-60_1160_AB-ERWHMQ_0.htm"target="_blank">link</a>

Overstock carries it, but I think it's a twin, 84 x 36? I wonder if they ever have it in other sizes?: <a href="http://www.overstock.com/Home-Garden/Ergomotion-400-Series-Adjustable-Bed/4661037/product.html?cid=123620&fp=F&ci_src=14110944&ci_sku=12584097"target="_blank">link</a>


Just an alternative to L&P.
Natalie
This message was modified Mar 1, 2010 by Natalia
Re: Adjustable bed (Leggett & Platt) Owners question
Reply #10 Mar 1, 2010 10:23 PM
Joined: Dec 29, 2009
Points: 57
Leo,

Thanks for the clarification on the power back-up.  I feel better now to find out I haven't totally lost my mind!  Still need to check on the battery thing though...would probably be a good idea before the next power outage, huh?! :)

Natalie,  so where were you when we had to buy our adjustable bed anyway?!!   Those beds do look great....when we rushed into our research, everyone said the L&P was the way to go, so for once I didn't push the research too far and spent my time focusing on the mattress which I thought was more important since I knew we would be safe with the L&P.  But I love the different base models available (i.e. Eurostyle)...that's the one thing I wish I had all figured out.  Would like to make the bed more attractive...and haven't conquered that one yet.  I have to mention that the price we paid was for a dual king (2 twin XL) base which brings the price up a bit more and since it was less than on the internet, we felt comfortable buying it.   They have this swing a way feature that lets you slide the bases apart to make the beds easier which is great...but to use them I cannot enclose the bed in a wood ram which I really wanted to do.  So, still working on that one.

Randy, they are not that cheap, unfortunately....but Natalie's choice looks like a reasonably priced option,  But I did find their beds on the internet...here is one site for instance...http://www.bedinabox.com/scape-adjustable-with-massage-p-258.html.

TJ

Re: Adjustable bed (Leggett & Platt) Owners question
Reply #11 Mar 2, 2010 12:16 AM
Joined: Jan 18, 2010
Points: 143
TJ12 wrote:
Natalie,  so where were you when we had to buy our adjustable bed anyway?!!   Those beds do look great....when we rushed into our research, everyone said the L&P was the way to go, so for once I didn't push the research too far and spent my time focusing on the mattress which I thought was more important since I knew we would be safe with the L&P. 

TJ, don't feel bad. At the time I bought mine, I hadn't done any research either.The Ergomotion 400 just happened to be the only adjustable base the store where I purchased the Englander mattress had. When I gave my son the Englander, I kept the base for my new mattress. I'm a generous mom, but not that generous.

Recent Posts