DIY Tempurpedic or which clone is best?
May 15, 2011 2:54 PM
Joined: Jan 5, 2011
Points: 17
I've been researching beds off and on for a while now, and am really ready to buy something but it is very confusing. Every time I think I have figured out what to buy I read something negative about my choice and feel like I'm back to square one. I know that most people on here seem to prefer latex but I really like memory foam and would like to either build my own Tempurpedic or buy one of the look-alikes already put together. I was looking at Restava and was going to go with one of theirs but then I read somewhere that they are some other company renamed, and evidently the other company had a lot of complaints. But on Facebook they look okay....so I don't know. I was even thinking of bedinabox.com but then read negative reviews about them and I'm suspicious of all their postive feedback, not sure it is real (probably not).

So then I thought well I'll make my own with some poly foam, maybe 6 inches, and then maybe 1 inch of latex and maybe 3 inches of memory foam (based on a post here). As far as the Tempur beds I have tried them in the store and I like the Deluxe but loved the Cloud Supreme and Cloud Luxe in the shop (but maybe too soft?), and thought maybe the best bet was the Allura.

So please, can anyone tell me if any of the knock-off companies that make similar beds to TP are any good? And if not, is my best bet the DIY route? I simpy don't want to pay $4000+ for a bed because I know there are much cheaper alternatives.

Thanks!

Re: DIY Tempurpedic or which clone is best?
Reply #5 May 18, 2011 12:25 AM
Joined: Jan 5, 2011
Points: 17
weewillywinky wrote:

Join the club, Terrieb! My spring mattress is older than yours! Anyway, I don't know about the Restava reviews on Facebook (I'm one of only 2 people I know of in the USA who won't sign up) but I can tell you that the Restava reviews on this site appear to be plants. Check out the registrations, the instant rave reviews, and then nothing further from those posters. If they do it here, why not on Facebook, too, with all that additional free exposure?

 

Well, just a word to the wise from the increasingly sceptically yours,

Wee Willy Winky

 

 


I'm not on Facebook either, not really in any meaningful way, just an account that I made that I can use to log in with when necessary at different sites. I don't even know how to use Facebook actually, and I am not technically challenged at all. As a matter of fact I practically live online and even build my own websites, but I continue to resist Facebook! 

Well, anyway, I am skeptical of all reviews these days as I am well aware they can be bought and paid for with numerous accounts. I even just noticed that on Restava's website reviews, two of them share an exact same paragraph. So they are evidently fake. Does that mean their products are no good? No, but it does mean they are less than honest as a company. And not very detail oriented either to let that slip by. 

Oh, the dilemma. I guess I will head out to one of the local stores here tomorrow and check out mattresses. Maybe I will give latex a chance. I've always really liked memory foam but who knows! :o)

 

Re: DIY Tempurpedic or which clone is best?
Reply #6 May 18, 2011 12:59 AM
Location: San Francisco Bay Area
Joined: May 13, 2011
Points: 170
Make sure you try out some innerspring mattresses as well.  I really liked the Tempur when I tried it.  But since then I have decided to try something different for the following reasons:

 - Tempur is nasty chemicals and I'm not sure I want to breathe it for the next 20 years; you can purchase eco-friendly latex

 - Tempur is expensive; latex is in the same price range

 - Many people fine Tempur sleeps too hot (I already have issues with this and I don't have foam)

 - With memory foam you sink in quite a bit.  I toss and turn ("rotisserie") and am worried how easy it is to "rotiss"

 - latex will probably last as long as Tempur

I found the web sites for Tempur clones to be just as confusing and lacking in information as some of the no-name latex sites.

But in either case the story seems to be US produced foam products are superior to "cheap imports".

You don't mention your budget.  But if you like the feel of latex, there are good choices that are in the $2k range that are not DIY beds.  There was a post that had a long list of latex stores (online and B&M) in the past six months.  It's a good place to start.

 

Re: DIY Tempurpedic or which clone is best?
Reply #7 May 18, 2011 1:45 AM
Joined: Jan 5, 2011
Points: 17
Yep, I've been reading just last night and today about the dangers of the chemicals in the memory foam. Probably not a good idea. I am looking to spend in between 1k and 2k probably. A little more if necessary. Once I figure out what I want (seems to be a common problem here).

The mattress store I'm going to try tomorrow has Pure Latex Bliss and also Scandinavian Sleep Systems, the usual "S" companies, and a few others. I hope the salespeople don't hover like car salespeople! 

 

 

Re: DIY Tempurpedic or which clone is best?
Reply #8 May 18, 2011 8:13 AM
Joined: Mar 20, 2011
Points: 71
Sounds like your're one of the lucky ones who can test different mattresses at local stores; that is a good thing. Remember, what works for others may not neccessarily work for you. Some choose latex over memory foam, for their own reasons, and others choice memory foam over latex for their own reasons as well.
Re: DIY Tempurpedic or which clone is best?
Reply #9 May 18, 2011 6:23 PM
Location: San Francisco Bay Area
Joined: May 13, 2011
Points: 170
The problem is that the inexpensive choices boil down to purchasing online and that's a crap shoot.  I'm not sure how exact the determination of ILD is.  There may be variation in foam from one vendor (or even one batch) to another.  And then there are other factors like how thick is the wool on top, what kind of boxspring, etc.  Mattress feel is very subjective and everyone has personal preference.  But you can still learn a lot from the people on this forum.

I found this site, /http://www.healthyfoundations.com/, which has knockoff memory foam.  But I don't know anything about the product they are selling.  Thave lots of reviews on shopping.com, but I'm not sure how easy those are to fake.

You'll find negative reviews about any company.  Even highly rated products on Amazon or Yelp have negative reivews.  It's the fraction of negative reviews and what people say that is important.

Good luck with your mattress shopping.

Re: DIY Tempurpedic or which clone is best?
Reply #10 May 18, 2011 8:44 PM
Joined: Mar 20, 2011
Points: 71
sleepswithcats wrote:

The problem is that the inexpensive choices boil down to purchasing online and that's a crap shoot.  I'm not sure how exact the determination of ILD is.  There may be variation in foam from one vendor (or even one batch) to another.  And then there are other factors like how thick is the wool on top, what kind of boxspring, etc.  Mattress feel is very subjective and everyone has personal preference.  But you can still learn a lot from the people on this forum.

 

I found this site, /http://www.healthyfoundations.com/, which has knockoff memory foam.  But I don't know anything about the product they are selling.  Thave lots of reviews on shopping.com, but I'm not sure how easy those are to fake.

You'll find negative reviews about any company.  Even highly rated products on Amazon or Yelp have negative reivews.  It's the fraction of negative reviews and what people say that is important.

Good luck with your mattress shopping.


Well put.

Re: DIY Tempurpedic or which clone is best?
Reply #11 May 19, 2011 3:25 PM
Joined: May 19, 2011
Points: 2
Remember that Density has a huge impact on the quality of a memory foam mattress. I dont know if you all realize this but Tempur's new line which is the Cloud line and the newer technology in it has improved the problem with sleeping warm or hot. So now, you dont have to worry about sleeping warmer. I would stay away from knock off's of Tempur. Tempur offers a great warranty 20 year with 10 year fully replacement for year 11 thru 20 is pro-rated. Also, another memory foam mattress that is pretty awesome is Serta's new IComfort series. The new IComfort has 25 year warranty with 15 fully replacement. The IComfort is 70% memory foam with 30% Gel. Just my 2cents.
Re: DIY Tempurpedic or which clone is best?
Reply #12 Apr 17, 2012 10:24 AM
Joined: Apr 17, 2012
Points: 1
It looks like a lot has changed since this thread was started: Restava's FB page is pretty active with new reviews. Did the OP end up buying one of their mattresses? Thoughts?
Re: DIY Tempurpedic or which clone is best?
Reply #13 Aug 22, 2012 4:47 PM
Joined: Aug 22, 2012
Points: 1
Beware of Restava; it is a scam.  I bought one and now feel duty bound to warn others from purchasing from this company.

 

I was sucked in by their 4th of July sale and their comparison to Tempurpedic (expensive, high quality beds).  The 4th of July sale never ends.  It is now called any size - twin price sale.  You will notice that there are no prices on their site for twin or queen size beds.  That's because their sale isn't a sale at all.  It is just a scam to get people to rush to buy.  The sale deadline is extended every week.  Don't be fooled by their mattresses either.  They ARE NOT memory foam and other than being rectangles they are in no way similar to Tempurpedic mattresses.  They are the same foam as you find in a cheap couch cushion.  Your back will hurt and you will wake up sweaty severals times each night.

 

If you are foolish enough to buy a mattress from them at least don't buy the $400 foundation.  It is the cheapest, unsturdiest crap money can buy.  It and their frame are flimsy and rock back and forth whenever you move.  Avoid their memory foam pillows like the plague.  They aren't memory foam; in fact they are almost transparent.  They are made of the cheapest foam available and they reek of chemicals.  After a month (when I returned it)  the smell was still as strong as the first day.

 

They did return my money thankfully.  I bought a memory foam mattress and frame online from Sam's Club for half the price.  It is far, far better than the garbage Restava sent me.

 

Restava has a brillant yet dishonest business plan.  They polish their website and Facebook page and are quick to do damage control (on Facebook) to give you the impression that their product is actually similar to Tempurpedic.  I'm convinced that most of the reviews on their website, Facebook and other sites are written by the same Restava employee.  Look at the sentence structure and over zeal in every post.  They are pros at this game and must be making a killing on their low quality products.

 

Avoid the hassle of getting your money back and just purchase a real bed from just about any other vendor.

Re: DIY Tempurpedic or which clone is best?
Reply #14 Aug 22, 2012 5:39 PM
Joined: Jan 24, 2012
Points: 70
Hi.. Listen to what everyone has to say and believe NOTHING...>>  all personal preference is what it adds up to be.. I caution you with memory foam it will fail you within a short time.. if you are looking for  support and don't mind sinking in and crawling out, and looking for that support they claim is in there all night,  then I guess it's the bed for you.. I have had every bed imaginable and have been taken for some outrageous amts. of money.. I am here to tell you that no matter what research you do you can come up with a bed that isn't worth the paper you signed your name on to buy it.   Memory verses Latex.. it is latex all the way, but a true latex, not one of these beds that they tell you has multiple layers of this and that and a cooling gel etc. etc.. I have been there done that.. talk about not getting your money's worth.. ugh!!!  Some of the good coil beds out there today have wonderful strong coils along with good durable latex on top..investigate these.. If you can get a really good solid latex that is really latex it would be your best bet.. however remember one thing.. this bed is a beast to turn and if they tell you that you never need to turn it.. laugh in their faces and walk out.. YOU do need to turn them especially in the beginning to condition them...1/4 turn is best. every month in the beginning.. however you will need 3 good strong men.. biggest mistake of our lives when we bought that one.. omg.. and then it was defective after 1 and 1/2 years..thats when I bought the worst bed ever.. memory foam.. beyond terrible.. and mine was a very expensive one, it sits in my guest room...now I have bought a cheaper mattress than all of them put together..and an inferior brand, and it is a coil // firm with some nice stitching and good cushioning on top, and knock on wood this was 1/4th the cost of any of the others has been a nice comfortable bed, especially for the money and my body at last..  Be a smart shopper because these beds are not cheap.. the salespeople will prey on you and will say anything it takes to make you open your check book...this is a major purchase that effects your body for a long time, take the time and talk to many people that you know.. not the internet to find out what they are sleeping on...evaluate your needs and your pocketbook to understand if you are stuck with it after you hate it can you live with that..!!!   I hate the mattress industry for what they have done to the consumer, they have confused us, demanded that we should only choose memory foam or latex, and they have the right to charge so much money for a terrible product.   Good luck and don't be taken to the cleaners, I have been there and it isn't any fun...Pleasant Dreams..

Recent Posts