Mattress Forum

I'm sorry for the delayed response – I haven't been on the forum in a few days. I thought I'd answer your questions on the public boards in the event my answers are helpful to others.

My Flobeds' Euro Slat foundation was indeed a Queen size. I didn't notice the bar in the middle, but it was beneath 11” of latex and I'm relatively light. However, when I set up the two sides of the bed differently in terms of latex layers/ILD and happened to lie across both sides of the bed (i.e., with one part of my body on one side and the other part of my body on the other side), I couldn't feel the different ILDs on each side but I woke up in major pain. The different ILDs appeared to have contorted my body as I slept.

Re: the mattress, I got the 100% all-natural Talalay v-Zone, made up of three layers of 3” latex (with the top one 'zoned') and the standard 2” convoluted top. I tried just about every configuration of layers on the firm side: XF, F, M (bottom to top); XF, XF, F; XF, M, F; XF, XF, M; etc. I very early on gave up on the v-Zone, because it was clearly not working – so the configurations listed above were for solid (i.e., unzoned) layers.

Unfortunately, Talalay simply didn't work for me and ended up damaging my back – it took me four months on a firm innerspring mattress to recover. When I laid directly on the M latex above the other layers of latex, it was too soft for me, leading to body contortions and pain. But when I laid directly on top of the F or XF, it was far too firm, pushing against my pressure points in a painful and aggravating way. And with each passing night on the bed, my pressure points became increasingly sensitive and tender. These effects eventually led to a continuous low-grade headache, which stayed with me for at least several months after I stopped using the mattress. I rarely get headaches, and I had not suffered from any major back problems prior to all this beyond some upper back pain after extreme strain (long-distance running, moving, etc.), so this was alarming.

Interestingly, I did okay (but not great) lying on 3” of the M latex on top of a firm innerspring.

The Euro Slat foundation itself appeared sturdy and well-built. I think it's largely hand-constructed and free of chemical finishes. Also, it comes in six pieces that are easy to assemble and take apart for storage or transit. Flobeds is GREAT about customizing the foundation and they made a number of tweaks for me, including making the foundation shorter and the legs square rather than the standard round, which made me feel especially bad when I had to return the set. When I laid across the slats, it felt safe and supportive (and immensely comfortable, as I mentioned in my initial post) – although I wouldn't recommend sitting (or standing!) directly on the slats without a mattress on top.

 On the downside, the foundation wasn't perfectly constructed, maybe because it was hand-made (?). For example, the six pieces weren't all flush in some places, and one leg wouldn't screw in properly. Some of the leg casters weren't centered properly on the leg and thus protruded beyond the leg base But these were minor issues and I would absolutely recommend the foundation itself,.

I didn't end up keeping the foundation because I figured it was meant to accompany the latex mattress, and in any event I had decided to go back to a firm innerspring set, which would come with its own boxspring. But now that I think about it, the Euro Slat should work with any latex mattress, not just Flobeds'. The only thing to remember is that the foundation is covered in Flobeds' trademark sheep-patterned wool and cotton fabric, so it might not match other mattresses (I personally don't think this is a big deal).

Also, if you go with the Euro Slat, I personally would recommend using less latex. I think Flobeds sells a 9” version of its mattress, which contains 8” of latex; that might work better, especially if you're of normal or light build. 

BTW, after returning the Flobeds I tried lying on several Savvy Rest Dunlop beds, of different configurations. While I didn't get to try them overnight, I seem to do better with Dunlop, and with thinner mattresses. I think a good combination for me might be 9” of Dunlop on top of a Euro Slats style foundation, but unfortunately Flobeds doesn't offer Dunlop, and Savvy Rest doesn't offer the Euro Slats!

Keep in mind that each person is different, and I appear to have had an extreme reaction to this particular configuration of bed, which seems to have worked immensely well for many others. My troubles with this bed – which were so bad that I have developed a near phobia to bed buying – was surprising, as I am in pretty good physical condition and NEVER had a problem with a bed before. But I guess life's curveballs are what keeps it interesting!

 I hope this doesn't make things more confusing. Please let me know if you have more questions.

I'm trying another variation of the flex slats which is a lot pricier and will report back once I get it and can put decent time on it.

I was in Ikea today and looked at a couple of their latex mattresses and the slats they offer. The most expensive slat system was $300 and I can't say I would trust it, the slats were awfully thin. It was motorized, but did not have a box frame around it like Flobeds has. It is interesting to note that the most expensive of their latex mattresses, which was springy, comfy and bouncy was set on a box spring. The next one down was set on adjustable slats and it was not springy at all.

So... back to square one for me.  I may buy the Flobeds slats and get a mettress elsewhere.

Thanks for that info.  Can you put a link or info on the slats you are looking at buying?

After reading and re-reading your posting it just makes me more afraid to try anything new.  My back and hips do not like the latex toppers over my spring mattress.  Do you have a latex topper over your spring mattress now?  What ILD would you use if you were to try again 32ILD in blended talalay?  If Natural Talalay didn't agree with you wouldn't Dunlop also not agree with you?

The construction of the slats doesn't sound so good for over $700 in my opinion. Now I am back to square one.  I want to see and buy locally after hearing this, but unless I bought a very expensive Natura at Sears that is all I can come up with in the ideas for buying locally.

Thanks for all that detailed info.  Makes me more afraid though.  My back is pretty messed up after sleeping on the latex for a year now with it being soft enough for my shoulder, and my hips are in pain from sleeping on too soft and hitting the hard mattress.  So not sure what to do.

How long have you had the Flobed?

Hi Leo, I'm sorry I made you more anxious with my answers -- I can relate, as I myself have gotten nearly phobic about the bed-buying process, having learned from my recent experience that the wrong bed can not only wreak havoc on one's sleep and all one's waking hours, but can also lead to a ridiculously time-consuming process to work through and resolve. I've already spent untold hours on researching and trying out beds, not wanting to repeat the same bad mistake.

I will say that a firm mostly cotton tufted innerspring (with minimal padding) ended up being great for my back, but I got rid of it for other reasons. I did try it with a latex topper and didn't love it, but it was slightly more comfortable than lying on just the innerspring.

I wouldn't try Talalay again, as it was so disastrous for me last time. To be honest, I am a little worried that the Dunlop might be problematic too, but when I lay on several Savvy rest ones the Dunlop felt more solid with less 'push-back'. I have also been reassured that Dunlop is closer to innerspring than Talalay so I am hoping (praying) this will be the answer.

Have you tried a high-quality innerspring? I wonder if that will help, with a soft topper (e.g., the wool one you have, maybe a little thicker on on top of a thin dunlop topper) for your hips. I think for some back problems, as with mine, a firm mattress can help.

Also, I didn't mean to discourage you re: the Flobeds Euro Slat foundation. I actually thought it was a good product for the price, even if the workmanship could have been a tad better on the details. Overall, it seemed sturdy and functional.

That's what I've got.  But it's unsupported in the middle.

Linda

Did the Euro slat foundation creak or make noises when you toss and turned?

I am still undecided on the whole thing.  I have only been searching for over a year for the "perfect" solution.