inexpensive foundation for latex?
Mar 21, 2010 3:36 AM
Joined: Jan 10, 2010
Points: 42
We need to find a better foundation for our ca king latex mattress - our current frame doesn't have a center support.  Flobeds has a foundation with its own legs that would fit inside our current frame, but we'd like to find something a little less expensive (the mattress itself kind of soaked up the budget). 

Anybody have any suggestions?  Either a slat structure or a flat platform would be fine as long as it supported the weight of the mattress on it's own.  I've looked at those metal frame things ('better than a boxspring', etc) sold by Target and Walmart and I don't think those look like a great idea.

Linda

Re: inexpensive foundation for latex?
Reply #3 Mar 22, 2010 2:34 PM
Joined: Mar 2, 2010
Points: 27
@ Leo3  not my DIY slat foundation, but I plan on building one from scratch.  I'm sure it can be firmed up totally solid with choice of building materials.
Re: inexpensive foundation for latex?
Reply #4 Mar 22, 2010 4:06 PM
Joined: May 3, 2008
Points: 827
Okay here I am again looking at foundations.  Flobeds has an adjustable beech slats foundation.  I want no chemicals. 

Here is the link on the Euro slat foundation click here  It flexes and I think that would really make a difference on comfort without sinking in.  Almost like springs.  Though hopefully not as hard.

This message was modified Mar 24, 2010 by Leo3
Re: inexpensive foundation for latex?
Reply #5 Mar 22, 2010 4:17 PM
Joined: May 3, 2008
Points: 827
Another great link from our historical forum......
Re: inexpensive foundation for latex?
Reply #6 Mar 22, 2010 6:06 PM
Joined: Nov 4, 2008
Points: 223
Leo, i was wondering the same thing: Is it necessary for slats/platform to flex? Mainly wondering because I think there would be less motion transfer if they don't flex, but would this still be healthy for the mattress?
Re: inexpensive foundation for latex?
Reply #7 Mar 22, 2010 10:45 PM
Joined: May 3, 2008
Points: 827
I don't think it is "necessary" but it might be nice.  I don't see why it would hurt the latex flexing, afterall they use latex on adjustable beds too.

If you look at the link above your posting, Haysdb put lots of great pictures showing how you make they make slats firmer in the area you want.  I would put the firm plastic things in the hip area to make it firm, and leave the shoulder area to flex.  I don't know if you would have that much motion transfer, particularly if the system is split, I believe they are split for queen and king.

I think this would be like a spring mattress.  Nobody has talked much about this system.  I have seen these at Ikea, but I don't buy from them since they refused to allow me to return a mattress topper that was not the same as their floor model, it was over $200 too!  Still fuming over that one.  I love to rant and rave wink

Sure wish someone here would post here if they have a Euro Slat foundation. 

Re: inexpensive foundation for latex?
Reply #8 Mar 23, 2010 1:13 AM
Joined: Dec 31, 2009
Points: 35
Leo, I had a Flobeds Euroslat foundation and am all for the flex slat system. In the end, the talalay latex didn't work for me and being petite, I couldn't feel/benefit from the slats underneath the 11" of latex plus the plush wool cover. But lying on the slats directly felt great! The slats provided firm support under my lower back where I needed it and had plenty of give under the shoulder/upper back area to relieve pressure. So I think they work in theory, but just need to be paired with the right mattress (i.e., not too thick or firm).

BTW, in the event you're wondering, I don't make it a normal practice to lie on bare wood slats. I was taking a break from packing up the mattress to send back, and I must say, it was the most comfortable surface I'd slept on in a long time! 

Not to overtax our resident mattress expert, but Budgy has a compelling explanation for what makes flex slat systems so great. So you might want to PM him if he doesn't make an appearance here..

Hope this helps!

Re: inexpensive foundation for latex?
Reply #9 Mar 23, 2010 1:18 AM
Joined: Dec 31, 2009
Points: 35
WOW, as a total sidebar - just noticed that WTBM seems to have fixed the problem that many of us have had with paragraph breaks! Thank you, admin!
Re: inexpensive foundation for latex?
Reply #10 Mar 23, 2010 1:50 AM
Joined: May 3, 2008
Points: 827
I am sorry your latex bed didn't work out, I have been reading back postings and I read that alot.  Why some just love them and some don't work out.  It can really confuse a person who is trying to decide.

The reason I was thinking about the Euro Slats is I remembered outside furniture that had plastic strips spaced apart like the Slats, and how comfy they were, and I had no pressure points.  Of course I didn't lay on my sides, but I would have hip pain if I didn't have some give in the chair.

Did you keep the Euro Slats to try a thinner latex bed?

Re: inexpensive foundation for latex?
Reply #11 Mar 23, 2010 5:14 AM
Location: L.A. area
Joined: Jan 18, 2008
Points: 1161
It would be so great if one had unlimited funds to "try" this and try that!

I'd love to try an adjustable slat frame.

I have used foam just flat on the floor and I had no problem with it. Maybe if you live in a very humid area or sleep on a concrete floor at ground level it could be a problem but for many situations I think just putting a mattress - spring or foam - on the floor can be just fine. Then again, maybe some backs need some "give" under them. Who the heck knows? Now I'm back to "Woudn't it be great to have unlimited funds to try this and that...?"

So anyway, my reply to the question re inexpensive foundation for latex, is: The Floor.

Or a "regular" S company box. Many of them have no "spring" anymore, they're just wood slats with material over them. Sometimes you can get real good deals on them if the mattress store wants to make a sale bad enough.

If I were "handy", had the tools and such, I would just build one. I'd build a frame and make it just high enough to clean easily under it with a vacuum, and put slats across it. This goes back to the other thread about toxins in latex and such:

My one concern is the smell from wood. God knows what kind of chemicals they treat wood with, I have noticed that a lumber store smells pretty "toxic". I wonder, if I were to buy some wood, what kind would be best to buy, to avoid toxins? I know, regular wood, itself, should be natural enough. But it smells like maybe they treat it with chemicals...??

Re: inexpensive foundation for latex?
Reply #12 Mar 23, 2010 4:11 PM
Joined: May 3, 2008
Points: 827
Yes Jim some lumber is treated with bad chemicals.  I think Flobeds said there pine slats and beech wood is safe if I am correct.

Anyone know for sure?  Just anothe issue for me to think about, UGH!!!

I agree Jim I need an unlimited amount of money to try all of these things.  I am so desperate to sleep more than a few hours at a time.....  I just want to sleep on my sides without pain.

Recent Posts