Mattress Forum

Thanks megalops, sensible thinking and I can't argue with it. I have been looking at the FloBeds as well as SavvyRest.  I went back to our local source and notice the springs are coil, not high count, not individually wrapped and discovered via research many tidbits - but the springs are good gauge and good turn  ratio - next weekend we will go see how things 'fit' - they do exchange latex cores and refresh mattresses! I went back to my other source and studied the bed I liked in the showroom - but now it only comes with separate topper rather than all together and is too soft, oy....   

So I am thinking I am a long way from being finito with the nightly battle, yet  am on a good road. 

The first mattress we purchased was a really good SImmons,  which replaced an old one of same brand -  I can still lay on it when I go see my son and wife and the foundation is very different from current one - so they put a good memory there as far as purchasing.    If you're happy with such for twenty years you think you're onto something...  So we figured another Simmons would work - I've put toppers of all kinds on it and like most folks on this forum I'm still gritting my teeth and staying sore. I have a huge problem with the rail around the edge and the springs feel like a box of rocks with horrid motion transfer.

I also wonder about the foundation - we had more than a bit of trouble with our retailer when we purchsed this set several years ago. We purchased a pillow top, the guy wrote it up as plush - it was not a pleasant experience -  we chose a low profile foundation, wood - took two tries after they delivered a standard and messed up ur bed frame and still we are stuck with the metal mess on the bottom.  I can see inside it and it's not great.      I'm older and grumpier, I have a list to take shopping with me now and I do not accept  verbal 'blah blah'.    With latex the slats will be needed, but what a thought to put the foam on the base!! 

No way am I going back to this retailer, despite their popularitity and you are so right about being an informed consumer - who knew getting a good night's sleep would be such an exercise.

Well mostly the problem is that they put too much cheap non-supportive foam on top of them which quickly breaks down and then provides NO support. This is especially true with pillowtops which one should avoid like the plague. Get a firmer mattress then add your own 1-2" of soft latex to soften it up while providing good and long-lasting support.

So the biggest problem with S-Brands is that they use cheap non-supportive, non-lasting foams.

Sometimes they do use very good springs though, which paves the way for doing mattress surgery to replace their cheap foam with good foams.

Personally I have heard nothing but bad things about Serta. They are considered by many within the mattress industry to be the worst of the S-Brands. YMMV.

My own research has led me to believe that a high-end S&F or Simmons is probably your best bet with the S-brands. But if you buy an S-brand just avoid pillowtops, go wtih Firm and add your own toppers to soften it up.

The big issue people find with the "S" Brands is Success. Anytime you are successful people will look at ways to bring you down. All the "S" Brands make low end bedding to High End bedding and anywhere in between. The individually pocketed coils are the best for Motion transfer without going to an all foam bed, but you sacrifice durability for motion transfer.

An all foam mattress does the best for motion transfer reduction. Latex, Memory Foam, or just High Density Poly Foam will all perform equally in that aspect. With Poly Foam of anytype including Memory Foam it does have an odor from manufacturing, but this dissipates over time. The newer the foam is from the manfacturing plant the stronger the smell. Also the higher the density of the foam the longer it takes for the odor to dissipate.

Now the Stearns & Foster and Simmons both use Synthetic Latex and not 100% Natural latex and that is their crossover. They are both very good beds, but I dont want you to be mislead into thinking they are 100% Natural Latex when they are infact Synthetic Latex. Natural Latext will not have the odor like the poly foams or memory foam.

Bottom Line as to what is so wrong with the "S" Brands is Success.

You seemed to be a little confused about what is used in each brand uses as coil systems.

Serta uses the continous coil which in fact is the lightest spring unit in the industry using the least amount of steel. It does have a decent design and holds up fairly well depending on which unit you get. In their starting line they use the Bonnell coil.

Simmons individually pocketed coil system is great for motion transfer as it doesnt distribute your weight across the bed so you do give up some duarbility. You dont give up support, because you are sleeping on more coils in most Breauty Rest then you do on any other mattress. It just doesnt maintian that level of support as long as a Sealy or Serta. Simmons Also uses the Bonnell Coil in their base line mattress's

Sealy Use's an offset coil system in their Posutrepedic line which has been proven by Sealy, Stearns & Foster, and many other manufactures to be the longest lasting coil system in the industry. It does transfer motion more than the individually pocketed coil system, but each coil has 5 turns and each turn is the same diameter at the top as it is in the middle and on the bottom. Sealy like most other manufactures use the Bonnell coil in their base line and not in the posturepedic.

Boxprings versus foundations - A boxspring was design to work with certian innerspring mattress sets and increase the life of a mattress that is usign a Continous coil, Bonnell Coil, or Offset Coil. The boxspring flexed and took some of the stress off the actual coil system increasing the life of the mattress some. It also made the mattress feel a little softer and a little bouncy. So they increased strength in these boxsprings in Sealy and Stearns so they dont flex as much but they still do flex.

Foundtions work best For individually pocketed coils and foam beds. The pocketed coil system actually last longer and provides mroe support on a foundation then it does on a boxspring. These coils are not tied together and do not distribute your weight across the bed. The flexing of a boxspring would tend to pull the pocted coils out of alignment and had caused the mattress to wear out very quickly. This is why Simmons had a very high return rate for several years until they swtiched to a steel foundation and their return rate droped drastically. The all foam doesnt work well on a boxspring becuase the foam will begin to pocket down into the wire grid or coils underneath it.

The Serta on a firm foam base will perform well. You will need to change the base out in 4 to 5 years to be able to maintain the support the mattress systems needs, but it should provide a plush feel and the mattress may even last 15yrs or better if you continue to change out the foam base every few years.

The Bonnell Coil is the most widely used coil system in the world and has been for more than 70 years and that is because every innerspring mattress manufacture uses the Boonell coil system in some of their beds.

Actually Pillow Tops are just fine, but you want to find out what is used in the quilt or if they use a lot of fill in the top of the quilt.  The foam inside the pillow top versus the plush top when looking at the same type and model of mattress is exactly the same. There is no special or different type of foam that goes in a pillow top versus a plush top. It is exactly the same foam. The pillow top version is just the way the quilting is attatched to the bed, it has nothing to do with what is inside.  There are firm pillow tops that will take longer to compress than a plush non pillow top. The truth of the matter is if you like a very soft plush mattress you are going to have body impressions sooner than someone who likes a firmer harder mattress. Dont worry weather it is pillow top or not find the comfort level that is right for you.

As to pillow tops, I submit that there is virtually no S Company using more than just one very thin layer of latex in their pillow tops. You're going to find cheap polyurethane and visco foams (not even the good stuff) in those mattress "pillow tops".

I stand by my statement that pillow tops are to be avoided because they are made from cheap foam and break down very quickly leading to a lack of support and back pain for many people.

One's best bet is to get a firm mattress and add one's own pillowtop by buying 1, 2 or 3" of latex of ILDs of your liking, 14-24ILD, I'd say. If memory foam is to be used, add it oneself because it will break down quicker than latex and you'll want to replace it when it starts hurting your back. Personally I can only tolerate memory foam for a week or two before it starts to hurt my back and I've tried the heavy, good quality stuff, not the cheap junk most S companies put into their toppers.

Dave, do you work for a mattress company or did you? It's fine if you did, but I'm just curious because you seem to have a pro-S Co. bias. To say that the problem with S Co's is that they are successful is simply nonsense. I could give you about a dozen reasons as to their problems, from misleading customers by using different names at each store, to hiding the truth beneath misnomers and not revealing the actual contents of their mattresseses on those "foot of the bed" signs you see in all the stores. Want me to go on?

I don't mean to be impolite but when you say the problem with S Co's is their success you are way off base in my humble opinion and I have spent a lot of time studying and researching mattresses and worked in the mattress industry for a short time - long enough to learn all the b.s. that goes on!

My personal take is that in order to get a mattress without all the chemicals and cheap filler I have to go to the top tier of Stearns and Foster.  The chemicals have darn near killed me as it is.  Why would I do that? Well I for one would really like to try the bed before purchasing, although in all honesty the odds are 50/50 even then.  I'd prefer to not have to drive around for days on end to find a mattress, but I live outside a major metro area and I have health issues - by the time I've gone so far then I'm too darn tired to do the hours of up and down.   What I have nearby is easy access to the S brands, Costco, and some brands you could not pay me to sleep on because they are toxic.     I'd rather buy from the little guy who sells top notch handmade mattresses made out of things that are natural and not chemical based. I'd rather have my bed delivered and set up. I'd rather have my old bed hauled off (no charity does pick up where I live), but that I can work around.  

Now here I am considering building my own mattress... 

Internet is a wonderful thing, but why wouldn't I be terrified of spending thousands of dollars on something I can't feel?   If I drive for an hour and a half we can get to a store that carries OMI, Englander, and so on - they don't carry anything that can't be flipped or gotten into for adjustment and I like that.  They are going to want body parts for payment and I will happily leave them whichever aching joint or burning muscle they would like in exchange for a good nights' sleep.  I don't care who makes it - I don't care if it has a twenty five year warranty - I don't care if it has a pretty cover - and I truly don't care if it's six, seven, or fifteen inches thick. 

I will however care very much if I wke up one night and have a migraine from rubber fumes, the samples have a slight odor that I don't find  unpleasant at all - and I'm not aiming for Dunlop so the smell of Talalay is less noticeable.   I'm not looking forward to having to spend hours in a store filled with chemically treated beds in order to find my natural one, have aspirin will travel.  

I do not want vinyl coated springs, I don't want poly fill or poly foam.    We turned this mattress/hammock we have and that reduced the rocks that were translating - but a hammock is a hammock and not reccomended for any time longer than it takes to drink a mai tai.    Unfortunately it's not wise to start and end every single day of your life with a mai tai in hand.

Thank you all

Agree, and a quick google will bring up hundreds upon hundreds of angry people all complaining about the same thing: Buying an expensive pillowtop and having it turn into a hammock in short order.

If you don't want to spend a fortune on hand-made mattresses or other specialities, I think Jim Socal has the very best solution: Buy a good quality firm mattress, then soften and customize it with toppers.

Thanks for your clarification.  Any information that keeps us better informed is great!

I think back to all the sleep setups I have slept on, and I just found better luck with the serta "perfect sleeper" with the continuous coil.  Without rehashing all my bedding experiences, suffice it to say that I believe consumers are becoming much more in the know about bedding choices, especially with latex and DIY setups.  It has become much easier for informed guys and gals to get into a good night's sleep without having to go to the furniture store and blindly pick something out, or worse, do a sleep number bed or a tempurpedic experiment only to find they have shelled out thousands of dollars on something they can't tolerate, much less even remove from the house!

I'm 50 years old, and I want to be informed, to know what my choices are.  I have switched out both bedrooms from crappy metal frames to quality platform beds (see www.haikudesigns.com). and gone from there with foam, latex, and decent mattresses in various configurations.

Keep the information flowing!