|
Ok, I bit the bullet and ordered the SleepEZ 10000 and returned the Costco Comfortluxe. I am a bit nervous about ordering a mattress without having tried it! :) However, what I really liked was Shawn even suggested I spend LESS and buy the 8500 model because "you just don't use more than 5.6/6" of foam." He said that until the mid-80s all the latex mattresses were just 6", but since then people think more is better. I ended up choosing the 10000 because of bed sheet fiting, Shawn said that sheets can be a bit of a pain to get for the thinner mattresses nowadays (Sheets are made for huge beds now) So despite my nervousness on buying something sight unseen, I just keep telling myself all the wonderful reviews I have read here about the service level with Sleepez means it should be ok! :) (i hope :) ). This message was modified Dec 15, 2007 by novahelp
|
|
Lynn2006 wrote: Then if the Medium over Medium over firm feels good, you can make the other side of the bed the same. If it is a little bit too firm, you can request another medium to put underneath so you have no firms. Please let us know how this works out. I am glad I remembered the split layers so you could see if it would work out. I must get to bed. Thanks I forgot that I could do this type of combination. Reporting back from a so-so nights sleep. It doesn't feel good. it is tolerable. :( Hardly worth the amount of money I spent. I think I may have figured out part of the problem. The mattress case/shell is HARD. I am used to sleeping directly on memory foam which gives a soft luxurxious feel. The mattress case is a wool top that makes it feel to me EXACTLY like a normal mattress with no conforming properties at all. This wool top doesn't let the latex mold to my body -- it always feels stiff. It is stiffness as well as the firmness that is the problem. I think I need some other type of mattress case as well as getting a softer top layer. This message was modified Dec 28, 2007 by novahelp
|
|
Reporting back: I just put back on my 3" memory foam topper, so I have the following: 3" memory foam medium latex medium latex firm latex This setup is too soft, however the awful feeling of the stiff wool top is no longer there. I think this is part of the problem! I hope they have a different shell they can send me as this thing is not good to me at all. |
|
Can you describe the mattress cover a bit? There seems to be a lot of discussion about the latex on this board but very little about the mattress covers. Some of the mattress web sites seem to gloss over the details of the covers. Is the fabric itself stiff? - like it is infused with silica (sand) or something else for fire retardancy reasons? Or is it stiff because it is a tight fit around the latex? The Sleep EZ web site describes a "luxury cotton cover quilted to wool". Can anyone else comment on the mattress covers for other layered latex mattresses too? |
| "The contribution of the cover deserves far more attention than it gets. Taut, non-stretch covers create a "hammock, or "trampoline" effect, are not enveloping, and can be uncomfortable. Paradoxically, softer latex may feel firmer. The 4 way stretch memory foam type covers are one good solution. |
|
I just spoke to Sean. He said he would send: 1) A terry cloth stretch mattress case. He thought this would be a lot softer than the wool one and give me the softer feel I am used to as compared to memory foam. 2) Soft latex layer All shipped at no charge to me. Thus far, service is fantastic. This message was modified Dec 28, 2007 by novahelp
|
|
mccldwll wrote: "The contribution of the cover deserves far more attention than it gets. Taut, non-stretch covers create a "hammock, or "trampoline" effect, are not enveloping, and can be uncomfortable. Paradoxically, softer latex may feel firmer. The 4 way stretch memory foam type covers are one good solution. That is exactly the problem I get, but couldn't describe it as well as you just did. This cover is not at all "enveloping", which is why I described above as feeling exactly like a normal mattress this latex foam. :) I just rotated my foam and with the case open laid down directly on the foam without the mattress closed: medium medium X-firm Wow, so much nicer when my body is in direct contact with the latex!!!!! It actually envelopes my body just wonderfully!!!! :) It is definitely the mattress case and it's resulting stiffness. I hope the stretch terry cover fixes this, otherwise I may just sleep directly on the foam :) This message was modified Dec 28, 2007 by novahelp
|
|
novahelp wrote: I just spoke to Sean. He said he would send: 1) A terry cloth stretch mattress case. He thought this would be a lot softer than the wool one and give me the softer feel I am used to as compared to memory foam. 2) Soft latex layer All shipped at no charge to me. Thus far, service is fantastic. Now THAT is customer service! |
|
Novahelp, I am glad I was able to help you reminding you that you have split layers so to at least make one side of your bed the way you want it to be and then work on your other side. I am glad SleepEZ is living up to their reputation like I thought they would with their service. I know FloBeds shipped me so far three toppers at no charge to help me since I loved the bed but did not like the too thick too soft 2" topper that came with the mattress since I did not sink in enough (being only not quite 5 feet tall and not quite 100 lbs) to feel the firmness underneath that I need since I am used to a very firm bed. I was also shipped at no charge higher legs to go with my new Iron Headboard and I was overnighted the attachments for the headboard so they would be here when my headboard arrived. I was sent a newer and softer cover when Dave got them in. So far I have heard mostly all good from FloBeds.com and SleepEZ.com on their family owned businesses giving great customer service. Novahelp, hang in there and be patient. You will be able to tweak the bed to be comfortable and you will then love it. I had a wonderful night's sleep with my 1" very soft topper again (over 36 ILD over 44 ILD over 44 ILD) but I really want to like the 1.5" 22 - 23 ILD topper since it is sturdier and fits my queen bed better so I will try it out again tomorrow with another combination. I still wish I had a 1.5" topper on the top of my shoulders and 1" below my shoulders both in soft since that is how it is most comfortable. But I do love my Latex bed and how I can move latex cores around. I also love the new latex cover Dave sent me a few months ago since it is soft and more comfirming. Novahelp, Please let us know how the Terry Cloth Cover is since that sounds like the best of both worlds. |
|
Lynn2006 wrote: Novahelp, I am glad I was able to help you reminding you that you have split layers so to at least make one side of your bed the way you want it to be and then work on your other side. I am glad SleepEZ is living up to their reputation like I thought they would with their service. I know FloBeds shipped me so far three toppers at no charge to help me since I loved the bed but did not like the too thick too soft 2" topper that came with the mattress since I did not sink in enough (being only not quite 5 feet tall and not quite 100 lbs) to feel the firmness underneath that I need since I am used to a very firm bed. I was also shipped at no charge higher legs to go with my new Iron Headboard and I was overnighted the attachments for the headboard so they would be here when my headboard arrived. I was sent a newer and softer cover when Dave got them in. So far I have heard mostly all good from FloBeds.com and SleepEZ.com on their family owned businesses giving great customer service. Novahelp, hang in there and be patient. You will be able to tweak the bed to be comfortable and you will then love it. I had a wonderful night's sleep with my 1" very soft topper again (over 36 ILD over 44 ILD over 44 ILD) but I really want to like the 1.5" 22 - 23 ILD topper since it is sturdier and fits my queen bed better so I will try it out again tomorrow with another combination. I still wish I had a 1.5" topper on the top of my shoulders and 1" below my shoulders both in soft since that is how it is most comfortable. But I do love my Latex bed and how I can move latex cores around. I also love the new latex cover Dave sent me a few months ago since it is soft and more comfirming. Novahelp, Please let us know how the Terry Cloth Cover is since that sounds like the best of both worlds. I will definitely report back. It will take about 1.5 weeks for the new stuff to arrive. In the meantime, thankfully, my setup of my old memory foam topper on top of medium medium x-firm is quite comfortable (albeit still a bit softer than I like, and I want to sleep directly on latex and not the mushy memory foam). |
|
Got the new layer of soft foam and the terry cloth cover. Well, the terry cloth cover is IMPOSSIBLE to put over the foam. The problem is the side of the cover are attached to the top and not the bottom, so you can't stuff the layers in. I gave up after about 1hr of trying, and Shawn said he would order me a larger one custom if needed. I then just put my sheets directly on the foam in this order Soft - Medium - Firm . MUCH better sleeping directly on the foam! When I sit on the foam rapidly i kind of feel the ground, but laying and sleeping i can't feel anything but foam. I may switch the bottom layer to x-firm to provide more support . |